Chevrolet VENTURE 2005 Dokumentacja Pobierz pdf (Strona 408)

100

101

A. Strap

B. Bag and Tools

C. Jack

Store the center cap or the plastic bolt-on wheel covers

until a full size tire is put back on the vehicle. When you

replace the compact spare with a full-size tire, reinstall

the bolt-on wheel covers or the center cap. Hand-tighten

them over the wheel nuts, using the folding wrench.

Compact Spare Tire

Although the compact spare tire was fully inﬂated when

the vehicle was new, it can lose air after a time.

Check the inﬂation pressure regularly. It should be

60 psi (420 kPa).

After installing the compact spare on the vehicle, stop as

soon as possible and make sure the spare tire is correctly

inﬂated. The compact spare is made to perform well at

speeds up to 65 mph (105 km/h) for distances up to

3,000 miles (5 000 km), so you can ﬁnish your trip and

have the full-size tire repaired or replaced at your

convenience. Of course, it is best to replace the spare

with a full-size tire as soon as possible. The spare tire

will last longer and be in good shape in case it is

needed again.

Notice: When the compact spare is installed, do

not take your vehicle through an automatic car wash

with guide rails. The compact spare can get

caught on the rails. That can damage the tire and

wheel, and maybe other parts of your vehicle.

Do not use the compact spare on other vehicles.

And do not mix the compact spare tire or wheel with

other wheels or tires. They will not ﬁt. Keep the

spare tire and its wheel together.

Notice: Tire chains will not ﬁt your compact spare.

Using them can damage your vehicle and can

damage the chains too. Do not use tire chains on

your compact spare.

5-82

1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 469 470

Komentarze do niniejszej Instrukcji

Brak uwag

Chevrolet VENTURE 2005 Dokumentacja Strona 408

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Samochody Chevrolet VENTURE 2005